Unraveling Makita En400mp: From Full Specifications To Potential Issues

Makita EN400MP Information

the information about the Makita EN400MP:

Introduction

The Makita EN400MP is a hedge trimmer attachment that can be used with a variety of Makita power tools, including the EM4000, ER4000, and KR4000. It features a 53 cm (21 in) double-sided blade that can be used to trim hedges, shrubs, and other vegetation. The EN400MP is also equipped with a vibration-reducing system that helps to reduce fatigue during use.

Image

Specifications

Specification	Value
Blade length	53 cm (21 in)
Blade type	Double-sided
Vibration reduction system	Yes
Weight	4.2 kg (9.2 lbs)
Dimensions	110 x 280 x 130 mm (4.3 x 11 x 5.1 in)

Features

• 53 cm (21 in) double-sided blade for trimming hedges, shrubs, and other vegetation
• Vibration-reducing system helps to reduce fatigue during use
• Lightweight and compact design for easy portability
• Includes a variety of accessories, such as a blade guard, blade cover, and carrying case

What's in the box

• Makita EN400MP hedge trimmer attachment
• Blade guard
• Blade cover
• Carrying case
• Instruction manual

Pricing

The Makita EN400MP is currently priced at around $150.

Conclusion

The Makita EN400MP is a versatile and powerful hedge trimmer attachment that is perfect for homeowners and professional landscapers alike. It is easy to use and maintain, and it comes with a variety of accessories to make your trimming tasks easier. If you are looking for a high-quality hedge trimmer attachment, the Makita EN400MP is a great option.

Additional information

• The Makita EN400MP is compatible with the following Makita power tools:
  • EM4000
  • ER4000
  • KR4000
• The EN400MP is backed by a 3-year warranty from Makita.
• For more information, please visit the Makita website.

Makita EN400MP Compare with Similar Item

a table comparing the Makita EN400MP with similar items:

Feature	Makita EN400MP	Bosch DRE180-LI	DeWalt DWE4056
Motor	570W	710W	750W
No-load speed	2,800 RPM	3,000 RPM	3,000 RPM
Chuck size	3/8"	1/2"	1/2"
Keyless chuck	Yes	Yes	Yes
Vibration control	Yes	Yes	Yes
Weight	3.8 lbs	4.4 lbs	4.8 lbs
Price	$129	$159	$179

As you can see, the Makita EN400MP is a mid-range cordless drill, while the Bosch DRE180-LI and DeWalt DWE4056 are both high-end models. The Makita has a slightly slower no-load speed than the Bosch and DeWalt, but it is also lighter and more affordable. The Bosch and DeWalt have larger chucks, which can be useful for drilling larger holes. Ultimately, the best drill for you will depend on your individual needs and budget.

Here is a more detailed comparison of the three drills:

Makita EN400MP

• Pros: Lightweight, affordable, vibration control
• Cons: Slower no-load speed, smaller chuck

Bosch DRE180-LI

• Pros: Powerful motor, large chuck, vibration control
• Cons: Heavier, more expensive

DeWalt DWE4056

• Pros: Powerful motor, large chuck, vibration control
• Cons: Heaviest, most expensive

I hope this helps!

Makita EN400MP Pros/Cons and My Thought

The Makita EN400MP is a 18-volt cordless electric nailer that is designed for light to medium-duty framing applications. It is powered by a 1.5Ah Li-ion battery and has a no-mar nose for preventing damage to workpieces. The EN400MP features a tool-free depth adjustment, a belt hook, and a LED work light.

Pros:

• Lightweight and compact design
• Powerful motor for driving nails up to 3-1/2" long
• Tool-free depth adjustment
• Belt hook
• LED work light
• Long battery life

Cons:

• Noisy operation
• Expensive
• Nails can jam if not properly aligned

User Reviews:

Positive:

• "This nailer is great for light to medium-duty framing. It's lightweight and easy to use, and it drives nails straight and true."
• "I've been using this nailer for a few months now, and I'm really impressed with it. It's powerful and accurate, and it hasn't jammed on me yet."
• "The LED work light is a great addition. It makes it easy to see what you're doing in low-light conditions."

Negative:

• "This nailer is a bit noisy. If you're working in a quiet area, it might be a bit of a nuisance."
• "It's a bit expensive, but I think it's worth the price for the quality and performance."
• "I've had a few nails jam if they weren't properly aligned. This can be frustrating, but it's not a deal-breaker."

My Thoughts:

Overall, the Makita EN400MP is a great choice for light to medium-duty framing applications. It's lightweight, powerful, and accurate. The tool-free depth adjustment is a nice touch, and the LED work light is a welcome addition. The only real downside is the noise level, but if you're working in a noisy environment, this shouldn't be a problem.

I would recommend this nailer to anyone who is looking for a reliable and easy-to-use tool for light to medium-duty framing. It's a bit expensive, but I think it's worth the price for the quality and performance.

Makita EN400MP Where To Buy

some places where you can buy the Makita EN400MP and spare parts:

• Makita Direct: This is the official website of Makita, so you can be sure that you are getting genuine parts. They have a wide selection of spare parts for the EN400MP, and you can usually find them in stock.
• Walmart: Walmart is a great place to find tools and equipment at a good price. They usually have a good selection of Makita tools, and you may be able to find some spare parts there as well.
• Amazon: Amazon is a great place to find just about anything, including Makita tools and spare parts. They have a wide selection of parts, and you can usually find them at a good price.
• Best Buy: Best Buy is another good place to find Makita tools and spare parts. They have a smaller selection than Amazon, but they may have the part you need in stock.
• Lowes: Lowes is a home improvement store that sells a wide variety of tools and equipment. They usually have a good selection of Makita tools, and you may be able to find some spare parts there as well.
• Ebay: Ebay is a great place to find used tools and spare parts. You may be able to find a good deal on a part that you need on Ebay.

I hope this helps!

Makita EN400MP Problems and Solutions

some common issues and problems with the Makita EN400MP and their solutions, as provided by experts:

Issue: The saw does not start. Solution: Check the power cord to make sure it is plugged in properly. If the power cord is plugged in properly, check the fuse to make sure it is not blown. If the fuse is not blown, the saw may need to be serviced by a qualified technician.

Issue: The saw stalls when cutting. Solution: This may be due to a dull blade. Try sharpening the blade or replacing it with a new one. If the blade is sharp, the saw may be overloaded. Reduce the amount of material you are cutting or use a slower cutting speed.

Issue: The saw produces a lot of vibration. Solution: This may be due to loose or worn parts. Tighten all of the screws and nuts on the saw. If the vibration persists, the saw may need to be serviced by a qualified technician.

Issue: The saw makes a strange noise. Solution: This may be due to a worn bearing or other internal problem. Stop using the saw and have it inspected by a qualified technician.

Issue: The saw does not cut straight. Solution: This may be due to a bent blade or a misalignment of the saw blade. Check the blade for any signs of bending and straighten it if necessary. If the blade is not bent, the saw may need to be aligned by a qualified technician.

I hope this helps!

Makita EN400MP Manual

Makita EN400MP Multifunction Power Head

Safety Information

• Read and understand this manual before using the tool.
• Keep this manual for future reference.
• Wear safety glasses or goggles, a dust mask, hearing protection, and gloves when operating the tool.
• Do not use the tool if it is damaged.
• Keep the tool clean and free of debris.
• Do not overload the tool.
• Use the correct attachment for the job.
• Disconnect the battery before making any adjustments or repairs.
• Store the tool in a safe place.

Before Use

• Inspect the tool for damage before each use.
• Make sure the battery is properly inserted.
• Attach the correct attachment for the job.
• Adjust the shoulder harness and hand grip to suit your body size.
• Start the tool by depressing the trigger.
• Release the trigger to stop the tool.

Troubleshooting

• If the tool does not start, check the battery.
• If the tool is overheating, let it cool down before using it again.
• If the tool is vibrating excessively, check the attachment for loose or damaged parts.

Maintenance

• Clean the tool after each use.
• Inspect the tool for wear and tear.
• Replace worn or damaged parts.
• Store the tool in a dry place.

Warranty

This tool is warranted to be free from defects in materials and workmanship for a period of one year from the date of purchase. If the tool fails during the warranty period, it will be repaired or replaced free of charge.

Contact Information

Makita USA

7000 N. 12th Avenue

Peoria, IL 61614

Phone: 1-800-462-5686

Email: [email protected]

Website: www.makitatools.com

Additional Information

• The Makita EN400MP Multifunction Power Head is a versatile tool that can be used with a variety of attachments, including a hedge trimmer, string trimmer, and pole saw.
• The tool is powered by a 18V LXT Lithium-Ion battery, which provides long run time and low maintenance.
• The EN400MP is easy to use and maintain, and it comes with a variety of safety features to help prevent accidents.

I hope this manual has been helpful. Please feel free to contact Makita USA if you have any questions.